There are a myriad of components, mental and physical, that I enjoy during the creation of my artwork. The interesting part is that not all of these parts are enjoyable. But that’s life, isn’t it? To me, what’s the most important is that I learn something valuable during the creating my art. The physical artwork may be sold. But the experience is mine.
No one likes to make mistakes. They are time and materials wasted. As an artist that posts a lot of art-in-process pictures on my Instagram account, showing a failure is embarrassing. It’s humanizing, but still embarrassing.
(To see pictures of my work in progress, you can check out my Instagram account here.)
If you’re a reader of my blogs, you know that there is a certain amount of creating that I do mentally. The ideas go back and forth between paper and my brain until I sit down and begin creating. A great deal of the materials I use are ones that I’m very familiar with. So it’s not difficult for me to mentally turn the piece around in my head; creating it virtually.
My problems with the design were three fold. First being that I didn’t take into account how small I was working. Methods of laminating carton board with glue work well when creating larger work. Lids for the brooches were 5.5 to 6 cm long with a frame of between .4 to .6 mm. The laminated carton board was so difficult to cut cleanly with an X-Acto knife. And it wouldn’t stand up to sanding either. It just smushed-up and fell apart.
Second, the super-simple peg hinge was just not robust enough to handle having the lid slid back and forth repeatedly. This movement also highlighted the fragility of the laminated carton board. Two of the lids simply tore at the hole made for the peg hinge. And there was no way to mend them satisfactorily.
The third and last design problem was that I hadn’t taken into account what the finished pieces were intended to be. Brooches are meant to be worn. And they will get a certain amount of jostling around when worn. My original lid design was not secure enough to prevent the tiny doll inside from potentially falling out and being lost.
Fixing the brooches:
For a while I toyed around with ways in which I could repair the flimsy lids and peg hinges. All of them would result in creating more work to cover for the mistakes I made. To make matters worse, these cover-ups were just not any good. From a design and engineering perspective.
I had some book board left-over from a class I took last autumn. It’s .2 mm thick and stands-up to sanding. Cutting the board was a bit of a challenge. So many curves! I made sure to take my time, as well as several breaks when I found myself getting frustrated. I added a lip around the outside edges of the lids as well. So in the finished product, the lids will stay put. No little lost dolls will occur!
Large rectangular boxes:
Yes. I made a mistake with these four pieces as well. While the mistake won’t require a tremendous amount of additional work. Part of me is just angry that I made such a stupid mistake. Especially since it was one of the very first of the lessons I learned working with cardboard and carton board!
I use carton board as a veneer over the corrugated cardboard in my work. The reason being is that when corrugated cardboard gets wet, it begins to break down. It gets ripply, and stays that way even after drying. My theory is that the gesso I make kind of freezes the rippling into place when drying. Seeing the rippling surface is distracting.
Adding the carton board veneer just keeps the underlying corrugated cardboard from getting too wet. And it preserves a (relatively) flat surface to paint and draw on. My plan for these four boxes is to line them with felt. Veneering them seemed a waste of time and materials. Long story longer, I should have veneered them.
Why? Because in addition to being ripply, they took twice as long to dry than if I had veneered them. Each of the boxes has around eight layers of newsprint and glue on top of the cardboard. The glue saturated the un-veneered corrugated cardboard and took twice as long to dry completely. Around 48 hours.
Fixing the boxes:
Well, there’s nothing much to fix at this point. I still intend to cover the insides with felt. There will still be a plastic window over each of the fronts of the boxes. I have several different designs I want to try for the boxes. These boxes are meant to protect and display the doll. But I would like to make the doll removable as well.
My bigger problem with these pieces is what to call these specific types of boxes. The design of the box is influenced by action figures (dolls) that can be purchased at stores. The hang tab isn’t meant to be used as a hanger. A separate hanger will be added to the back of the finished piece.
Are they shadow boxes? Box frames? Just frames? Display frames? Packaging? It really bugs me that I can’t settle on a name. They are an integral part of the finished piece. Not simply a frame to display it on a wall. Even though that is one of the things it can do. Weird.
New gesso recipe:
I’m also trying out a new gesso ingredient. Chalk. To be specific, ground-up sticks of chalk I purchased at the store. The reason I’m experimenting with chalk is because I’ve been having problems with the plaster forming nodules within the liquid gesso. I tried sieving it. I also tried squeezing it through cheese cloth. Both had limited success.
The nodules that the plaster formed made sanding miserable at times. I couldn’t quite get rid of all them either. Meaning that I had to figure out how to either make it part of the surface texture, or minimize it through the painting and surface decoration.
I’m still trying to get the chalk ground the way that I want it to be. A mortar and pestle has been cobbled together, utilizing a thick, clear glass container and an empty bottle. The coarsely crushed chalk is added to the glass container and ground finer with the bottle. Any small nodules of chalk that do make it through the process can be easily crushed with my finger while wet. Or sanded off when dry, leaving little evidence of their existence on the surface of the art.
Well, I’m at that monotonous stage of adding layer after layer of gesso on each piece. It’s not a whole lot of fun. Usually, it takes about ten minutes before I find a working groove, and can just pick-up, paint, put-down and repeat over and over again. The lessons I learned with regard to the brooches will be very helpful to me in the future. Especially considering that I’m having a lot of fun creating the teensie-tiny, itty-bitty dolls. And see more of them in my immediate creative future.
(I kid you not. I just got an insanely cute idea for these teensie dolls. Damn. How did I NOT see that idea before!)
Thank you for reading, and I’ll see you again next Friday.